If you have any problems related to the accessibility of any content (or if you want to request that a specific publication be accessible), please contact us at scholarworks@unr.edu.
Search
Now showing items 1-10 of 52
Evaluation of Mixtures from LTPP SPS-10 Warm Mix Asphalt (WMA) Sections.
(2017)
The Nevada Department of Transportation (NDOT) commenced a full-scale project in 2016 to extensively evaluate Warm Mix Asphalt (WMA) mixtures that would likely be used in the State in the future. This was accomplished by ...
Evaluation of Nevada's 1995-1997 HMA Mixtures
(1997)
Recently, there have been dramatic changes in traffie volumes, axle loads, and tire pressures. Total traffic volumes have been steadily increasing and, consequently, the percentage of heavy trucks using the highway system. ...
Performance of Superpave and Hveem Sections in Nevada: Volume IV
(2003)
The Nevada Department of Transportation (NDOT) has strongly supported Superpave related research and implementation efforts since the completion of the Strategic Highway Research Program (SHRP). However, it is one of the ...
Development of a Joint Density Specification: Phase II - Evaluation of 2004 and 2005 Test Sections (Report 3)
(2005)
The overall objective of this research was to establish the needed knowledge base for the development and implementation of a longitudinal joint specification for the Nevada Department of Transportation (NDOT).
Development of a Joint Density Specification: Phase I - Literature Review and Test Plan
(2004)
The objective of this research study is to develop a specification for longitudinal joins on hot-mixed asphalt (HMA) pavements. The study consisted of two phases: phase 1 reviewed all current specifications for longitudianl ...
Development of a Joint Density Specification: Phase II - Evaluation of Test Sections (Report 2)
(2005)
The overall objective of this research was to establish the needed knowledge base for the development and implementation of a longitudinal joint specification for the Nevada Department of Transportation (NDOT).
Develop a PWL System for Dense Graded Hot Mix Asphalt Construction, Including Pay Factors
(2014)
This research project developed a PWL system that the Nevada DOT can effectively implement on the construction of dense graded HMA mixtures. The PWL system includes pay factors that are based on pavement performance ...
Compatibility of a Test for Moisture-Induced Damage with Superpave Volumetric Mix Design
(2000)
This report presents recommended changes to AASHTO Standard Method of Test T283, “Resistance of Compacted Bituminous Mixture to Moisture Induced Damage,” to enhance T283’s compatibility with Superpave® volumetric mix design. ...
Asphalt Concrete Anti- Stripping Techniques
(2003)
In 1999 the South Dakota Department of Transportation initiated a research project to assess asphalt concrete anti-stripping techniques. The overall objective of the research was to evaluate the effectiveness of anti-stripping ...
Evaluation of Thermal Cracking Resistance of Asphalt Mixtures
(2015)
The overall objective was to develop a comprehensive model for thermal cracking analysis of asphalt concrete pavements. The proposed model aims to remedy some of the recognized limitations in the current thermal cracking ...